Linux version 5.15.13 (olek@mocarz) (i686-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.08-rc1) 11.1.0, GNU ld (GNU Binutils) 2.37) #4 Wed Jan 5 21:41:36 CET 2022 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU x86/fpu: x87 FPU will use FXSAVE signal: max sigframe size: 1440 BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000007896efff] usable BIOS-e820: [mem 0x000000007896f000-0x0000000078f6efff] reserved BIOS-e820: [mem 0x0000000078f6f000-0x000000007916efff] ACPI NVS BIOS-e820: [mem 0x000000007916f000-0x00000000791aefff] ACPI data BIOS-e820: [mem 0x00000000791af000-0x0000000079ffffff] usable BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.7 present. DMI: IGEL Technology GmbH IGEL-D220/IGEL-D220, BIOS D220-002 02/01/2016 tsc: Detected 1466.667 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x7a000 max_arch_pfn = 0x100000 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Warning only 887MB will be used. Use a HIGHMEM enabled kernel. found SMP MP-table at [mem 0x000fe1c0-0x000fe1cf] initial memory mapped: [mem 0x00000000-0x01bfffff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000FE020 000024 (v02 INSYDE) ACPI: XSDT 0x00000000791AE120 0000A4 (v01 INSYDE INSYDE 00000003 01000013) ACPI: FACP 0x00000000791AA000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: DSDT 0x000000007919A000 009B71 (v02 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: FACS 0x0000000079140000 000040 ACPI: UEFI 0x00000000791AD000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000) ACPI: UEFI 0x00000000791AB000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000) ACPI: HPET 0x00000000791A9000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: APIC 0x00000000791A8000 000084 (v03 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: MCFG 0x00000000791A7000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: SLIC 0x00000000791A6000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: WDAT 0x00000000791A5000 0001C4 (v01 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: WDRT 0x00000000791A4000 000047 (v01 INSYDE INSYDE 00000003 ACPI 00040000) ACPI: SSDT 0x0000000079198000 000338 (v01 INSYDE Cpu0Ist 00003000 ACPI 00040000) ACPI: SSDT 0x0000000079197000 000433 (v01 INSYDE Cpu0Cst 00003001 ACPI 00040000) ACPI: SSDT 0x0000000079196000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000) ACPI: SSDT 0x0000000079195000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000) ACPI: SSDT 0x0000000079194000 0001D1 (v01 INSYDE SIOACPI 00001000 ACPI 00040000) ACPI: SSDT 0x0000000079193000 00022B (v01 INSYDE IsctTabl 00001000 ACPI 00040000) ACPI: FPDT 0x0000000079192000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000) ACPI: Reserving FACP table memory at [mem 0x791aa000-0x791aa10b] ACPI: Reserving DSDT table memory at [mem 0x7919a000-0x791a3b70] ACPI: Reserving FACS table memory at [mem 0x79140000-0x7914003f] ACPI: Reserving UEFI table memory at [mem 0x791ad000-0x791ad235] ACPI: Reserving UEFI table memory at [mem 0x791ab000-0x791ab041] ACPI: Reserving HPET table memory at [mem 0x791a9000-0x791a9037] ACPI: Reserving APIC table memory at [mem 0x791a8000-0x791a8083] ACPI: Reserving MCFG table memory at [mem 0x791a7000-0x791a703b] ACPI: Reserving SLIC table memory at [mem 0x791a6000-0x791a6175] ACPI: Reserving WDAT table memory at [mem 0x791a5000-0x791a51c3] ACPI: Reserving WDRT table memory at [mem 0x791a4000-0x791a4046] ACPI: Reserving SSDT table memory at [mem 0x79198000-0x79198337] ACPI: Reserving SSDT table memory at [mem 0x79197000-0x79197432] ACPI: Reserving SSDT table memory at [mem 0x79196000-0x79196762] ACPI: Reserving SSDT table memory at [mem 0x79195000-0x7919528f] ACPI: Reserving SSDT table memory at [mem 0x79194000-0x791941d0] ACPI: Reserving SSDT table memory at [mem 0x79193000-0x7919322a] ACPI: Reserving FPDT table memory at [mem 0x79192000-0x79192043] 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] Normal [mem 0x0000000001000000-0x00000000377fdfff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x000000007896efff] node 0: [mem 0x00000000791af000-0x0000000079ffffff] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff] On node 0, zone DMA: 1 pages in unavailable ranges On node 0, zone DMA: 98 pages in unavailable ranges On node 0, zone Normal: 2 pages in unavailable ranges Using APIC driver default x86/hpet: Will disable the HPET for this platform because it's not reliable Reserving Intel graphics memory at [mem 0x7b000000-0x7effffff] ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 TSC deadline timer available [mem 0x80000000-0xdfffffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists, mobility grouping on. Total pages: 225451 Kernel command line: panic=30 printk.devkmsg=on ieee80211_regdom=PL Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Checking if this processor honours the WP bit even in supervisor mode...Ok. Memory: 878148K/908908K available (2251K kernel code, 3409K rwdata, 616K rodata, 14732K init, 1132K bss, 30760K reserved, 0K cma-reserved) NR_IRQS: 2304, nr_irqs: 111, preallocated irqs: 16 random: crng done (trusting CPU's manufacturer) Console: colour VGA+ 80x25 printk: console [tty0] enabled ACPI: Core revision 20210730 APIC: Switch to symmetric I/O mode setup Enabling APIC mode: Flat. Using 1 I/O APICs clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15242246321, max_idle_ns: 440795270777 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 2933.33 BogoMIPS (lpj=14666670) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) process: using mwait in idle threads Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 CPU: Intel(R) Atom(TM) CPU E3815 @ 1.46GHz (family: 0x6, model: 0x37, stepping: 0x9) Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Spectre mitigation: kernel not compiled with retpoline MDS: Vulnerable: Clear CPU buffers attempted, no microcode Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 0000007fffffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered PF_NETLINK/PF_ROUTE protocol family thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) ACPI: 7 ACPI AML tables successfully acquired and loaded ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C18BC008 00007B (v01 Insyde ACPI5P0 00001000 INTL 20130117) ACPI: Interpreter enabled ACPI: PM: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI ACPI: Enabled 7 GPEs in block 00 to 3F ACPI: PM: Power Resource [USBC] ACPI: PM: Power Resource [PLPE] ACPI: PM: Power Resource [PLPE] ACPI: PM: Power Resource [CLK0] ACPI: PM: Power Resource [CLK1] ACPI: PM: Power Resource [FN00] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments HPX-Type3] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR) acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge acpi resource window ([0x100000000-0x4ffffffff] ignored, not CPU addressable) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0070-0x0077] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908fffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 pci 0000:00:13.0: reg 0x10: [io 0x2048-0x204f] pci 0000:00:13.0: reg 0x14: [io 0x205c-0x205f] pci 0000:00:13.0: reg 0x18: [io 0x2040-0x2047] pci 0000:00:13.0: reg 0x1c: [io 0x2058-0x205b] pci 0000:00:13.0: reg 0x20: [io 0x2020-0x203f] pci 0000:00:13.0: reg 0x24: [mem 0x90804000-0x908047ff] pci 0000:00:13.0: PME# supported from D3hot pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff] pci 0000:00:1a.0: PME# supported from D0 D3hot pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0x90800000-0x90803fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 0x10: [mem 0x90805000-0x908053ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x10: [mem 0x90806000-0x9080601f] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff] pci 0000:01:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit] pci 0000:01:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.3: PCI bridge to [bus 04] pci_bus 0000:00: on NUMA node 0 ACPI: PCI: Interrupt link LNKA configured for IRQ 9 ACPI: PCI: Interrupt link LNKB configured for IRQ 9 ACPI: PCI: Interrupt link LNKC configured for IRQ 10 ACPI: PCI: Interrupt link LNKD configured for IRQ 10 ACPI: PCI: Interrupt link LNKE configured for IRQ 0 ACPI: PCI: Interrupt link LNKE disabled ACPI: PCI: Interrupt link LNKF configured for IRQ 11 ACPI: PCI: Interrupt link LNKG configured for IRQ 11 ACPI: PCI: Interrupt link LNKH configured for IRQ 11 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] e820: reserve RAM buffer [mem 0x7896f000-0x7bffffff] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] clocksource: Switched to clocksource tsc-early pnp: PnP ACPI init system 00:01: [io 0x0680-0x069f] has been reserved system 00:01: [io 0x0400-0x047f] has been reserved system 00:01: [io 0x0500-0x05fe] has been reserved system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved system 00:02: [mem 0xfed04000-0xfed04fff] has been reserved system 00:02: [mem 0xfed0c000-0xfed0ffff] has been reserved system 00:02: [mem 0xfed08000-0xfed08fff] has been reserved system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:02: [mem 0xfef00000-0xfeffffff] has been reserved pnp: PnP ACPI: found 3 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns NET: Registered PF_INET protocol family IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 pci 0000:00:1c.1: BAR 8: no space for [mem size 0x00200000] pci 0000:00:1c.1: BAR 8: failed to assign [mem size 0x00200000] pci 0000:00:1c.1: BAR 9: no space for [mem size 0x00200000 64bit pref] pci 0000:00:1c.1: BAR 9: failed to assign [mem size 0x00200000 64bit pref] pci 0000:00:1c.2: BAR 8: no space for [mem size 0x00200000] pci 0000:00:1c.2: BAR 8: failed to assign [mem size 0x00200000] pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref] pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref] pci 0000:00:1c.3: BAR 8: no space for [mem size 0x00200000] pci 0000:00:1c.3: BAR 8: failed to assign [mem size 0x00200000] pci 0000:00:1c.3: BAR 9: no space for [mem size 0x00200000 64bit pref] pci 0000:00:1c.3: BAR 9: failed to assign [mem size 0x00200000 64bit pref] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] pci 0000:00:1c.3: BAR 7: assigned [io 0x5000-0x5fff] pci 0000:00:1c.3: BAR 8: no space for [mem size 0x00200000] pci 0000:00:1c.3: BAR 8: failed to assign [mem size 0x00200000] pci 0000:00:1c.3: BAR 9: no space for [mem size 0x00200000 64bit pref] pci 0000:00:1c.3: BAR 9: failed to assign [mem size 0x00200000 64bit pref] pci 0000:00:1c.2: BAR 8: no space for [mem size 0x00200000] pci 0000:00:1c.2: BAR 8: failed to assign [mem size 0x00200000] pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref] pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref] pci 0000:00:1c.1: BAR 8: no space for [mem size 0x00200000] pci 0000:00:1c.1: BAR 8: failed to assign [mem size 0x00200000] pci 0000:00:1c.1: BAR 9: no space for [mem size 0x00200000 64bit pref] pci 0000:00:1c.1: BAR 9: failed to assign [mem size 0x00200000 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: PCI bridge to [bus 04] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] pci_bus 0000:00: resource 11 [mem 0x80000000-0x908fffff window] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] pci_bus 0000:01: resource 1 [mem 0x90500000-0x905fffff] pci_bus 0000:01: resource 2 [mem 0x90400000-0x904fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:1d.0: 0xc028d105 took 2926484 usecs PCI: CLS 64 bytes, default 64 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15242246321, max_idle_ns: 440795270777 ns clocksource: Switched to clocksource tsc workingset: timestamp_bits=30 max_order=18 bucket_order=0 hpet: number irqs doesn't agree with number of timers i8042: PNP: No PS/2 controller found. sched_clock: Marking stable (3237527178, 5065918)->(3251716165, -9123069) Freeing unused kernel image (initmem) memory: 14732K Write protecting kernel text and read-only data: 2868k Run /init as init process with arguments: /init with environment: HOME=/ TERM=linux NET: Registered PF_UNIX/PF_LOCAL protocol family softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) softdog: soft_reboot_cmd= soft_active_on_boot=0 io scheduler mq-deadline registered lp: driver loaded but no devices found Non-volatile memory driver v1.3 ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1d.0: debug port 2 ehci-pci 0000:00:1d.0: irq 23, io mem 0x90805000 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected f71882fg: Unsupported Fintek device: 0903 f71882fg: Unsupported Fintek device: 0903 rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: registered as rtc0 rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram i801_smbus 0000:00:1f.3: SMBus using PCI interrupt i2c i2c-0: 1/2 memory slots populated (from DMI) i2c i2c-0: Successfully instantiated SPD at 0x50 libphy: r8169: probed r8169 0000:01:00.0 eth0: RTL8168g/8111g, 00:0b:ca:06:13:94, XID 4c0, IRQ 16 r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:13.0: version 3.0 ahci 0000:00:13.0: controller can't do DEVSLP, turning off ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso scsi host0: ahci scsi host1: ahci ata1: SATA max UDMA/133 abar m2048@0x90804000 port 0x90804100 irq 19 ata2: DUMMY Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) usb 1-1: new high-speed USB device number 2 using ehci-pci r8169 0000:01:00.0 eth0: Link is Down hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: TS2GSSD25H-S, 20140326, max UDMA/133 ata1.00: 3928176 sectors, multi 0: LBA ata1.00: Read log 0x00 page 0x00 failed, Emask 0x1 ata1.00: ATA Identify Device Log not supported ata1.00: Read log 0x00 page 0x00 failed, Emask 0x1 ata1.00: ATA Identify Device Log not supported ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA TS2GSSD25H-S 0326 PQ: 0 ANSI: 5 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: button: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: button: Power Button [PWRF] input: PC Speaker as /devices/platform/pcspkr/input/input3 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: thermal: Thermal Zone [TZ01] (28 C) Warning: Processor Platform Limit event detected, but not handled. Consider compiling CPUfreq support into your kernel. snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_realtek hdaudioC0D0: inputs: snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line snd_hda_codec_generic hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_generic hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0 snd_hda_codec_generic hdaudioC0D2: dig-out=0x4/0x5 snd_hda_codec_generic hdaudioC0D2: inputs: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 sd 0:0:0:0: [sda] 3928176 512-byte logical blocks: (2.01 GB/1.87 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk watchdog: watchdog0: nowayout prevents watchdog being stopped! watchdog: watchdog0: watchdog did not stop! EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=continue,commit=60. Quota mode: disabled. r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx NET: Registered PF_PACKET protocol family